Zenith ZoneCleaning TeamGet an instant estimateResidential post-renovation and post-construction cleaning after active trades, bulk debris and hazardous materials have left the home.
Zenith follows the fine-dust path from high ledges and finished surfaces to tracks, edges and repeated floor passes. Newly installed materials are reviewed before cleaning, and the priority order is shaped around the renovated rooms, adjacent spaces and approved person-hours.
$55 per person-hour before GST · 3-person-hour minimumPost-renovation cleaning is the right fit when completed work has left accessible fine dust across new finishes and nearby rooms. A different service may be more useful when the main need is ordinary buildup, moving preparation or a general occupied-home reset.
Cleaning too early allows new dust, contractor traffic and protective materials to undo finished work. Confirm these conditions before choosing the appointment date.
Cutting, sanding, drilling and major paint preparation should be complete throughout the affected area.
Arrange construction disposal and remove equipment, loose material, sharps and hazardous waste before Zenith arrives.
Share manufacturer guidance for stone, wood, paint, cabinetry, fixtures or other finishes that require a specific method.
Keep electricity, hot water, working lighting and a clear equipment route available for the full appointment.
Fine particles can settle above eye level, move through adjacent rooms and return to floors after higher surfaces are cleaned. Zenith plans a high-to-low sequence around the actual dust path.
Accessible high points are addressed first so falling particles do not undo finished lower work.
Compatible finished surfaces, tracks and edges are worked through with the new material in mind.
Vacuuming, damp wiping and additional floor passes collect recoverable dust after higher work is complete.
Post-renovation cleaning is $55 per person-hour before GST with a three-person-hour minimum. The useful range depends on where the dust travelled and what the newly finished home can safely support.
Room count, ceiling height and the number of affected adjacent spaces shape the starting labour.
Hallways, stairs, storage, tracks and open rooms can extend the scope beyond the work zone.
New stone, wood, paint, glass and cabinetry may require slower material-specific methods.
Heavy or resettling dust may need more than one vacuuming, wiping or floor-cleaning sequence.
These real Zenith images show surface, floor and team-based renovation cleaning. They demonstrate the process without claiming that every home, material or starting condition will respond the same way.
Drag each comparison to inspect the same area before and after cleaning. Each example is matched to the service scope it demonstrates.
Results vary with condition, material, access and approved cleaning time. Permanent staining, wear or damage may remain.
New surfaces can be delicate. Zenith reviews finishes, manufacturer guidance and remaining trade activity before choosing products or methods.
Once active trades and bulk debris are gone, Zenith works from high to low across compatible finished surfaces. Delicate materials are reviewed first, and settling dust may require repeated vacuuming and wiping.
Use these detailed resources to understand cost, scope and preparation before Zenith confirms the appointment.
Each guide adds relevant home, building-access and dust-migration context while the residential final-cleaning boundaries remain consistent across Greater Vancouver.
Zenith uses both terms for residential final cleaning after renovation work is complete. The service addresses accessible fine dust and finished-home details; it is not active construction-site, demolition, industrial or bulk-debris cleanup.
The confirmed scope can include high-to-low accessible dust removal, compatible cabinetry and fixtures, interior window glass, sills and tracks, kitchens, bathrooms, doors, baseboards, accessible vent covers and repeated floor cleaning. Priorities follow the renovated rooms, affected adjacent spaces and approved person-hours.
Cutting, sanding, drilling and painting should be finished. Trades, tools, protective materials, bulk debris and hazardous waste must be removed, and the home needs safe access, working utilities and enough lighting for the team to inspect new finishes.
Post-renovation cleaning is billed at $55 per person-hour before GST with a three-person-hour minimum. Renovated area, dust migration, present condition, access, requested interiors, new materials and the number of required passes shape the estimate and final time.
The team reviews delicate finishes and manufacturer instructions before cleaning. Products and methods are selected around the material rather than treating every new surface the same.
No. Active trades, bulk debris, hazardous materials and unsafe construction conditions must be cleared before ordinary post-renovation cleaning begins.
Fine particles can settle again from concealed ledges, continuing trade activity, open rooms or air movement. Zenith uses a high-to-low sequence and repeated passes where appropriate, but another visit may be needed when dust continues to migrate after the appointment.
Accessible compatible vent covers may be included in the confirmed surface-cleaning scope. Internal HVAC ducts, furnace systems and specialist air-duct remediation are not included.
The result is available immediately. Zenith contacts you afterward to confirm the details and booking.
Start my estimate →